Garnet Sand

Garnet Sand Manufacturer

Garnet Sand is a direct mixture of Almandite garnet sand manufacturer Fe3 AL3 (S104)3 with Mg and Mn in particle substitution for FE in the formula, and other minerals. It is proper for use as a low free silica blast cleaning media. Sand blasting machine that uses abrasive Garnet with the air force to clean or prepare surfaces for painting or other coatings. Shot blasting machine can also be used for the destruction of the garnet sand manufacturer, it is also used to remove contaminated materials from metal products, these have been cast or made produced and in some cases have been welded. The media is put in a tank and air pressure is kept under the same pressure as the operator will do sand blasting. The media is then dropped by pressure into a blast hose line, which pushes it out of the blast nozzle, which is the pressure of the air we use. Garnet Sand manufacturer is employed as a support layer during a multi-media filtration system. Garnet sand may be a present gem mineral with similar physical, chemical, hardness, friability, and micro-structure properties, which give the basic features for water and industrial chemical filtration processes. Utilization for garnet sand manufacturer range from small, single-media filters to technically developed multimedia commercial and industrial operations. Garnet sand helps to get rid of suspended particles from chemical and/or water filtration processes.

Physical Properties

• High specific gravity: 3.8 - 4.2
• Weight per cubic foot: 120 - 151 lbs
• MOH hardness scale: 7.6 - 8.0
• Acid solubility: <1%
• Cleanliness: Low dust
• Durability: Because of its hardness, high specific gravity, and the pounds per cubic foot, garnet sand, when installed correctly, stays in its own layer holding down the layers underneath during backwash.
• The layers above the garnet sand are lighter in weight (per cubic foot) and therefore they lift during backwash and dislodge the "floc" cleaning of the filter media. The Garnet sand is not used to replace silica sand but rather one or two support layers of garnet sand are used beneath the silica sand. Garnet sand is so durable and heavy that the layers above will be replenished or replaced well before the garnet and filter rock layers are replaced. Therefore, time and money are saved by using garnet sand in a filtering system.

Chemical Properties

Size Available

• Mesh 30/60

• Mesh 80

Garnet Sand Manufacturer in India

Garnet Sand Manufacturer offers a wide array of sizes in order to ensure maximum production for a variety of sand blasting and water jet cutting applications. Our garnet sand is a naturally occurring mineral that is made mainly of Almandine garnet sand manufacturer. This material is known for its natural hardness and durability, which allows for increased performance in many abrasive applications.

We provide steel shot, SS shot, copper slag, steel grit, garnet sand, quartz shot, aluminum oxide, glass beads, etc. We are the leading manufacturer of surface preparation machine and exporter of abrasive media. Our main focus is customer trust and a good relationship with the client. We are focused on our quality products and customer satisfaction. We provide abrasive Garnet Sand, Almandine Garnet Sand, Water Filtration Garnet, Garnet 12-24 Mesh, Garnet 20-40 Mesh, Garnet 30/60 Mesh, Garnet 80 Mesh at low price at minimum delivery time.

To enable us to quote for your requirement, kindly give us the following info –

1.      Particle size required (You may choose from above or give your own range).

2.      Packing required.

3.      Quantity required with a delivery schedule.

4.      Destination port.

5.      Payment terms.

6.      Discharge rate at the destination, if in break-bulk.

7.      Any other point which may impact the quote.