Send Email
Home » Zinc Cut Wire Shot

Zinc Cut Wire Shot

Price : ₹ 60 - 100 /kg

We are the manufacturer of a good range of Zinc Cut Wire Shot in size ranging from 0.4mm to 1.6mm size in both As cut and Conditioned form. We have available stocks of various sizes available with us.

Zinc Cut Wire Shot
Key Specifications
Brand Name Abrasive Grit
Material Zinc Cut Wire Shot
Packaging Size 25kg / 50kg / 1 Ton Jumbo Bag
Size (mm) 0.30 - 3.20 MM
Usage Surface Preparation, Cleaning, Peening, Deburring
Applications
Product Description
Company Profile
  • Zinc Cut Wire Shot is mostly used for nonferrous sand removal, deburring, and deflashing.
  • It removes parting lines and other defects and cleans delicate parts that would be damaged by harder abrasives, such as aluminium parts that cannot be anodized or plated.
  • These are used to deburr aluminium die castings, strip paint, and remove powder coatings without causing damage to the substrate.

Zinc Cut Wire Shot

Zinc Cut Wire Shot that's manufactured using quality zinc procured from reliable sources. these wire shots are created by cutting wire into lengths equal to wire diameter (also called wire pellets). aluminum cut wire shots are designed in various degrees of conditioning like normal conditioning, Moreover, these are available in maximum diameter of 2.4mm. Find application, in shot blasting, shot peening, processes to get rid of paints.

We offer a qualitative variety of Zinc Cut Wire Shots. Available at competent rates, our products decrease wear and tear on shot blasting equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast results. The zinc cut wire shot is out there in several sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into beads, the length adequate to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashing of non-ferrous elements. Zinc Cut Wire is additionally available during a conditioned form which is employed as a longer-lasting alternative to cast zinc shot. Deburring and deflashing of aluminum and zinc castings and die-castings. Replacement of sand from sand castings. Removal of parting lines and stains from non-ferrous castings. Extraction of water wrinkle from aluminum die castings and providing a luster satin-type finish. Zinc Cut Wire provides temporary corrosion strength to ferrous parts blasted with it. a really thin layer, up to 1.3μm thick is placed onto the surface of the part.

Abrasive ZINC CUT WIRE
Chemical Composition Zn 99.99% or up
  Fe 0.005% or less
Hardness 36-51 HV
Available Size 0.6 x 0.6 mm
  0.8 x 0.8 mm
  1.0 x 1.0 mm
  1.2 x 1.2 mm
  2.5 x 2.5 mm
  3.0 x 3.0 mm

 

Applications Zinc Cut Wire Shot

  • Surface finishing.
  • Obtain a profile pattern.
  • Shot peening.
  • Shot blasting.
  • Grit removal.
  • Pre-treatment.
  • Rust removal.
  • Blast cleaning.

Advantages of Zinc Cut Wire Shot

  • Most economical and lowest consumption.
  • Consumption 3-4 times less compared to cast shot.
  • No dust formation.
  • Faster cleaning.
  • Environmental friendly.
  • Uniform hardness.
  • Stabilized grain size.
  • The increased fatigue life of blasted parts.

Aluminum Cut Wire Shot Manufacturer

We offer an abrasive shot, Steel Shot, SS Shot, Steel Grit, Garnet sand, Quartz shot, Aluminum oxide, glass beads blasting for stainless steel, etc, and a qualitative range of industrial steel abrasive products.

To enable us to quote for your requirement, kindly give us the following info –

1.      Particle size required (You may choose from above or give your own range).

2.      Packing required.

3.      Quantity required with the delivery schedule.

4.      Destination port.

5.      Payment terms.

6.      Discharge rate at the destination, if in break-bulk.

7.      Any other point which may impact the quote.

We can also offer ungraded material for shipments in bulk in any quantities as desired by our buyers on FOB or CNF FO basis terms.

Our Milestones
Micro Blaster
Payment Terms
Micro Blaster